Fluke Networks
1 / 2 · Product viewFluke NetworksOriginal
MS2-100 MicroScanner2
We may earn a commission. How we earn.
Check price on AmazonModel: MS2-100
Important limit: A copper-cable verifier, not a certification tester: it reports wiremap and lengths, not pass/fail bandwidth limits
Confirm condition, quantity and included accessories on the retailer’s listing.
Compare versions and packagesSpecifications checked November 5, 2026. Full product details
MicroScanner2 Cable Verifier with main wiremap adapter, multi-language Getting Started Guide, batteries and a Fluke Networks carry pouch
Fluke Networks MicroScanner2 MS2-100 Cable Verifier
A handheld copper-cable verifier that shows graphical wiremap, pair lengths, distance to fault, cable ID and far-end device on one screen, with IntelliTone digital and analog toning and VDV service detection on RJ11, RJ45 and coax.
Selected package: MS2-100 MicroScanner2.
Model: MS2-100
These are different products. Check their specifications separately.
Adds PoE class 0-8 verification and powered-pair display.
Verifying switch PoE class and passive PoE voltage.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Cable types | RJ11, RJ45 and coax (coax on MS2 only) with built-in jacks — no adapters needed |
|---|---|
| Wiremap | Graphical display of shorts, opens and crossed wires at both ends |
| Length | Length of each pair and distance to fault, shown on the same screen as the wiremap |
| Cable ID | Reports the far-end cable ID |
| Toning | Built-in IntelliTone digital and analog toning to locate cables or wire pairs; digital mode works on Cat 5e, 6, 6a in bundles and in high-interference environments, and pairs with the IntelliTone 200 Pro Probe to verify wiremap from either end |
| Service detection | VDV detection of POTS voltage and polarity, powered 10/100/1000 Ethernet switches at the far end, and PoE availability and voltage |
| Display | Oversized backlit LCD showing wiremap results graphically |
| One-screen results | Combines what were four separate test modes (wiremap, lengths, cable ID, far-end device) into a single view |
| In the box | MicroScanner2 Cable Verifier with main wiremap adapter, multi-language Getting Started Guide, batteries and a Fluke Networks carry pouch |
| Model number | MS2-100 (Fluke Networks sku 2772449) |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A hand-held copper cable certification tester that certifies twisted-pair structured cabling from Cat 3 / Class C through Cat 6A / Class EA, with a 10-second Cat 6A autotest, HDTDR/HDTDX fault diagnostics and LinkWare reporting.
Check package and model options
A copper cabling certification tester covering Cat 3 through Cat 6A / Class EA with 10-second autotests, HDTDR/HDTDX diagnostics, and LinkWare Live management over Wi-Fi.
Check package and model options
Fluke Networks' flagship Versiv copper cable certifier for Cat 5e through Cat 8 / Class I/II to 2000 MHz, with Level VI/2G accuracy, 8-second Cat 6A tests and built-in alien crosstalk measurement.
Check package and model options
