Skip to content
Menu

Treedix

Treedix STRX5-0575

Treedix STRX5-0575 USB cable tester board with its 24 pin LEDs, in its acrylic case, on a white background

1 / 2 · Product viewTreedixOriginal

Check your model and package

Treedix STRX5-0575

Cable types tested:
Type-C 3.0 (Type-C 3.1/3.2), Type-A 3.0 and 2.0, Type-B 3.0, Micro-B 3.0 and 2.0, Mini-B 2.0, and Lightning (maker's page and manual)
Indicator:
24 LEDs, one per cable pin, showing connection status and which functions the cable carries (maker's page)
What it shows:
Number of wire cores and transmission performance, from which pin readings you can tell charging-only from data cables, per the maker's page

We may earn a commission. How we earn.

Find on Amazon
Compare
Package details

Model: STRX5-0575

Standard tester

Condition:
Confirm new or reconditioned on the listing
Quantity:
Confirm package quantity on the listing

Important limit: LED-only output: no screen, no resistance or eMarker readout, unlike the maker's STRX5-0816-AC tester

Confirm condition, quantity and included accessories on the retailer’s listing.

Specifications checked November 5, 2026. Full product details

Treedix USB Cable Tester Board USB Cable Checker Data Wire with Acrylic Case, Type-C / Type-A / Type-B / Micro / Lightning (STRX5-0575)

A compact LED cable tester board that checks continuity and function of Type-C, USB-A, Micro-B, Mini-B and Lightning cables, with 24 pin LEDs and an acrylic protective case.

Why people pick it

  • One board tests nearly every legacy and modern USB connector plus Lightning, per the maker's page
  • Per-pin LEDs make it obvious which wires a cable actually has, so charging-only cables are spotted at a glance
  • Two power options — the supplied CR2032 cell or Type-C 5 V — let it run standalone or from a port (manual)
  • Acrylic case protects the board in a toolbox (maker's page)

Know before you buy

  • LED-only output: no screen, no resistance or eMarker readout, unlike the maker's STRX5-0816-AC tester
  • A review on the maker's own page notes that a short between two wires can light the same LEDs as a healthy data cable, so the board alone cannot localize shorts
  • The manual warns not to connect it to a live device — it is for unpowered cable checking only
  • The maker publishes no electrical ratings or measurement accuracy for the board

Full specifications

Cable types testedType-C 3.0 (Type-C 3.1/3.2), Type-A 3.0 and 2.0, Type-B 3.0, Micro-B 3.0 and 2.0, Mini-B 2.0, and Lightning (maker's page and manual)
Indicator24 LEDs, one per cable pin, showing connection status and which functions the cable carries (maker's page)
What it showsNumber of wire cores and transmission performance, from which pin readings you can tell charging-only from data cables, per the maker's page
Short-circuit checkDetects internal short circuits that interfere with normal operation (maker's page); the manual warns that shorted pins, diodes or active electronics can give inaccurate results
Power supplyCR2032 button battery or Type-C 5 V input, selected by a switch (maker's page and manual)
CaseAcrylic protective plate, screwed on, with a protective film to peel before use (maker's page and manual)
BatterySupplied CR2032 cell with a plastic insulating tab to remove before use; two small metal contacts must sit above the cell (manual)
SKUSTRX5-0575

From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.

Alternatives to consider

PoE Texas POE Tester Gen2.5

PoE Texas POE-TESTER-GEN2.5

Specifications & conditions
Protocols decoded
Passive, 802.3af, 802.3at, 802.3bt (up to Type 4)

An inline RJ45 tester from PoE Texas that measures voltage, current and watts on live 802.3af/at/bt PoE runs and DC power supplies without interrupting data flow.

  • Networking
  • Electronics
  • Pros
Find on AmazonDetailsCompare