Fieldpiece
1 / 1 · Product viewFieldpieceOriginal
SC440 essential clamp meter kit (US)
We may earn a commission. How we earn.
Find on AmazonModel: SC440
Inrush current, dual display, 5000 count, backlight (60 s).
Important limit: Clamp measures AC current only - no DC jaw current, so it cannot measure DC amps through the clamp
Confirm condition, quantity and included accessories on the retailer’s listing.
Compare versions and packagesSpecifications checked November 5, 2026. Full product details
Fieldpiece SC440 - 400A Dual Display Essential HVAC Clamp Meter
Fieldpiece's mid-size True RMS HVAC clamp meter with a 5000-count dual display, inrush current capture for compressor motor-start diagnosis, temperature, capacitance and microamps in one meter.
Selected package: SC440 essential clamp meter kit (US).
Inrush current, dual display, 5000 count, backlight (60 s).
HVACR pros who need compressor motor-start (inrush) diagnosis.
Same family without the dual display; single display, no SC440 backlight, 200-hour battery life instead of 100 hours, and no inrush feature.
Buyers who want the SC-family basics at a lower price.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Display | 5000 count dual display, 3.3 measurements per second |
|---|---|
| Current AC (clamp) | Ranges 50 A and 400 A; resolution 0.01 A; accuracy ±(2.0% + 10) 50-60 Hz; crest factor ≤ 3; jaw opening 1.2 in (30 mm); overload protection 400 AAC |
| Inrush current | SC440 only: captures compressor motor starting current on the 50 A or 400 A range; 100-millisecond measurement period; minimum input >2 A on the 50 A range, >20 A on the 400 A range |
| Voltage AC (50-500 Hz) | Ranges 500 mV, 5 V, 50 V, 500 V, 600 V; resolution 0.1 mV; True RMS; accuracy ±(1.2% + 8) |
| Voltage DC | Ranges 500 mV, 5 V, 50 V, 500 V, 600 V; resolution 0.1 mV; accuracy ±(0.5% + 2); input impedance >100 MΩ on 500 mV, 10 MΩ on 5 V-600 V |
| Microamps DC | 500 µA range, 0.1 µA resolution, ±(1.0% + 2), 1 V burden - for flame rectifier diode tests |
| Resistance | 500 Ω to 50 MΩ; 0.1 Ω resolution; ±(1.0% + 5) up to 500 kΩ |
| Capacitance | 5 µF, 50 µF, 500 µF, 5 mF; accuracy ±(3% + 5) mid ranges |
| Frequency and duty cycle | 10 Hz to 1 MHz via leads and clamp; duty cycle 5%-95% |
| Temperature (Type K) | -30°F to 932°F (-35°C to 500°C); 0.1° resolution; ±(1°F) 32-120°F after field calibration |
| Non-contact voltage | Detects 24 VAC to 600 VAC (50-60 Hz); three-segment graph plus red LED and beeper |
| Safety | CAT III 600V; EN61010-1, EN61010-2-032, EN61010-2-033; overload protection 600 VDC or 600 VAC rms unless otherwise stated |
| Power | One 9 V battery (NEDA 1604); 100 hours typical alkaline; auto power off after about 30 minutes |
| Backlight | Blue, 60 seconds with auto-off |
| Size and weight | 233 × 79 × 45 mm; about 315 g including battery |
| Includes | SC440 meter, ADLS2 deluxe silicone lead set with gold-plated tips, ATB1 Wrap Tab Type K thermocouple, ASA2 short alligator extensions, velcro strap, 9 V battery, ANC12 padded case |
| Features | Magnetic strap, test-lead holder with detachable leads, hold, hi-voltage warning LED and beeper, continuity warning |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A compact True RMS HVAC clamp meter with 400 A AC current, temperature in °F/°C, capacitance, Auto Select mode and a swivel magnet for hands-free work.
Check package and model options
A basic True RMS clamp meter rated CAT III 600V and CAT IV 300V that measures AC current to 400 A, AC and DC voltage to 600 V, resistance and continuity; it doesn't measure DC current.
Check package and model options
A true-RMS 400 A clamp meter for commercial and residential troubleshooting, with AC/DC current and voltage, resistance, capacitance, frequency and temperature.
