Skip to content

Klein Tools

Klein Tools MM720

Actual products · maker photographs

Klein Tools MM720 Digital Multimeter, TRMS Auto-Ranging, 1000V, Temp, Low Impedance
Klein MM720MM720
Fluke 117 Electrician's True RMS Multimeter with Non-Contact Voltage
Fluke 117117
Brymen BM235 Digital Multimeter
Brymen BM235BM235
Inspect the actual tool

Marked measurement category

CAT IV 600V, CAT III 1000V, Class 2, Double insulation

The category and its voltage belong together. Match both to the installation; the voltage range alone does not establish the category.

The buying trap. A capability or category marking does not approve the leads, setup or a live procedure.

Open the source rows
Safety rating
CAT IV 600V, CAT III 1000V, Class 2, Double insulation; conforms to UL 61010-1/-2-030/-2-033, certified to CSA C22.2 equivalents and EC EN 61010/61326-1

Source record: MM720

Manufacturer specifications recorded by thisMETER. These are not our own measurements. References belong to this product record; a field-by-field source mapping is not claimed.

Safety rating
CAT IV 600V, CAT III 1000V, Class 2, Double insulation; conforms to UL 61010-1/-2-030/-2-033, certified to CSA C22.2 equivalents and EC EN 61010/61326-1

Record checked 2026-11-05.

Klein MM720. CAT IV 600V, CAT III 1000V, Class 2, Double insulation

We may earn a commission. How we earn.

Package variants not recorded

Check model MM720 and the included accessories on the maker’s page.

A verified retailer offer is not recorded.

Specifications checked November 5, 2026. Full product details

Klein Tools MM720 Digital Multimeter, TRMS Auto-Ranging, 1000V, Temp, Low Impedance

An auto-ranging true-RMS digital multimeter that measures up to 1000V AC/DC and 10A AC/DC, with temperature, capacitance, frequency, duty cycle, diode test, continuity and a low-impedance mode.

Why people pick it

  • True RMS, 1000V and CAT IV 600V / CAT III 1000V rating with a 6000-count display
  • LoZ mode, temperature, capacitance, frequency and duty cycle in one mid-size meter
  • Reverse-contrast LCD with an optical sensor stays readable in dark and bright light
  • 2 m drop rating, IP42 and a one-year accuracy calibration period, per the manual

Know before you buy

  • 10A current ceiling (unfused above that), so it is not for high-current loads
  • Accuracy figures are per-range, not a single headline number; resistance above 6MΩ is ±(2.0% + 10 digits)
  • No Bluetooth or data logging; memory tops out at min/max/relative readings

Full specifications

Voltage1000V AC/DC, auto-ranging (600mV to 1000V ranges)
Current10A AC/DC (600µA to 10A ranges), 10A/1000V fuse protected
Resistance600Ω to 60MΩ, ±(1.2% + 5 digits) / ±(2.0% + 10 digits)
Capacitance60nF to 6000µF
Frequency and duty cycle1 Hz to 500 kHz; duty cycle 0.1-99.9%
Temperature-40°F to 1832°F (-40°C to 1000°C) via thermocouple
Low impedance (LoZ)Mode for eliminating ghost voltages
Display6000-count reverse-contrast LCD with optical sensor that auto-adjusts to ambient light
Extra functionsDiode test, audible continuity, min/max/relative, data hold, auto power-off
Batteries2 x AAA
Drop protection6.6 ft (2 m)
Ingress protectionIP42
Safety ratingCAT IV 600V, CAT III 1000V, Class 2, Double insulation; conforms to UL 61010-1/-2-030/-2-033, certified to CSA C22.2 equivalents and EC EN 61010/61326-1
CalibrationAccurate for one year
Size6.94 x 3.37 x 1.88 in (176.3 x 85.7 x 47.7 mm)
Weight12.2 oz (345 g)
ColorOrange/black

From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.

Alternatives to consider

Amprobe PM55A Pocket Multimeter with VolTect Non-Contact Voltage Detection

Amprobe PM55A

Max voltage
600 V
Display counts
6,000 counts
Specifications & conditions
Safety rating
CAT II 600 V, CAT III 300 V
Max current
0.002 A

A credit-card-sized pocket digital multimeter with permanently attached test leads that measures AC and DC voltage to 600 V, microamps to 2000 µA, resistance, capacitance and frequency, plus built-in non-contact voltage detection.

Check package and model options

  • Electronics
  • Home DIY
  • Beginners
FLIR DM66 TRMS Digital Multimeter with VFD Mode

FLIR DM66

Max voltage
600 V
Safety rating
CAT IV 300V, CAT III 600V
Specifications & conditions
Max current
10 A

A True RMS digital multimeter for field service and electronics work, with a low-impedance mode, VFD-filtered voltage readings, capacitance, frequency and a Type K thermocouple input, rated CAT IV 300 V / CAT III 600 V.

Check package and model options

  • Electronics
  • Pros
  • Automotive
FLIR DM93-2 Industrial Digital Multimeter with Meterlink

FLIR DM93-2

Max voltage
1,000 V
Display counts
40,000 counts
Specifications & conditions
Safety rating
CAT IV-600 V, CAT III-1000 V
Max current
10 A

A 40,000-count True RMS industrial digital multimeter with VFD low-pass filtering, a LoZ ghost-voltage mode, CAT IV-600 V / CAT III-1000 V inputs and Bluetooth streaming to the FLIR METERLiNK app.

Check package and model options

  • Pros
  • Electronics
  • Automotive