FLIR ONE Compatibility

Our FLIR ONE pick is Edge Pro: wireless operation serves supported Android and Apple devices, with a 160 × 120 native thermal detector. Choose attached ONE Pro for one compatible phone, or ONE, formerly Gen 3, for simpler checks. Check the exact version: FLIR sells separate iOS and Android USB-C attachments. FLIR compatibility reference.

Compatibility and specifications checked November 2, 2026. These are manufacturer specifications and research-based recommendations.

thisMETER is reader-supported: when you buy through our links, we may earn a commission at no extra cost to you. As an Amazon Associate, thisMETER earns from qualifying purchases.

Quick picks

Compare specifications and all conditions

Share across supported iOS/Android devices; place camera separately

Our pick

Edge Pro

Main trade-off

Requires wireless pairing and a supported phone/app

Direct attachment with the higher native resolution

Our pick

ONE Pro, exact OS/connector version

Main trade-off

Android chipset exclusions still apply

Simple attached overview checks

Our pick

ONE / Gen 3, exact OS/connector version

Main trade-off

Lower native resolution; one centered measurement spot

Wireless placement with the simpler detector

Our pick

Edge

Main trade-off

Same 80 × 60 native dimensions as ONE; see processing conflict below

Full comparison table ↔

Swipe to compare. Row labels stay visible.

Your priority	Our pick	Main trade-off
Share across supported iOS/Android devices; place camera separately	Edge Pro	Requires wireless pairing and a supported phone/app
Direct attachment with the higher native resolution	ONE Pro, exact OS/connector version	Android chipset exclusions still apply
Simple attached overview checks	ONE / Gen 3, exact OS/connector version	Lower native resolution; one centered measurement spot
Wireless placement with the simpler detector	Edge	Same 80 × 60 native dimensions as ONE; see processing conflict below

Your priority	Our pick	Main trade-off
Share across supported iOS/Android devices; place camera separately	Edge Pro	Requires wireless pairing and a supported phone/app
Direct attachment with the higher native resolution	ONE Pro, exact OS/connector version	Android chipset exclusions still apply
Simple attached overview checks	ONE / Gen 3, exact OS/connector version	Lower native resolution; one centered measurement spot
Wireless placement with the simpler detector	Edge	Same 80 × 60 native dimensions as ONE; see processing conflict below

FLIR renamed ONE Edge / ONE Edge Pro to Edge / Edge Pro, retaining support, firmware and accessories. Rename announcement.

Will FLIR ONE work with your phone?

Start with FLIR's current compatibility page, then its separate Android chipset advisory. The short smartphone FAQ warns that unlisted Android phones may or may not work.

Sources: FLIR requirements and App Store listing. Android also needs GPS, Location, OTG USB and Microphone capabilities, and Location, Microphone and Nearby Devices permissions; Edge needs Wi-Fi and Bluetooth. A 64-bit processor can run a 32-bit environment: check arm64-v8a, then try installing FLIR ONE before buying. Installation alone does not establish camera connectivity.

Android chipsets: the exclusions a USB-C label misses

FLIR reports connection problems with Android ONE Pro, Pro LT and Gen 3 on these chipsets:

FLIR advisory specifically names Galaxy S9/S9+ versions from the USA, LATAM and China. Check your exact regional phone's manufacturer specifications.

FLIR suggests Edge/Edge Pro or another phone for affected devices. Wireless still needs app compatibility: its Huawei advisory cannot guarantee compatibility with EMUI/HarmonyOS devices.

1. 1

   Check the app first

   Confirm the current OS and device requirements on the actual phone or tablet.

2. 2

   Choose your connection

   Share between supported platforms or move the camera separately: Edge. Attach directly: ONE in the correct OS/connector version.

3. 3

   Check Android exclusions

   Compare the exact regional phone chipset with FLIR's advisory; wireless also has phone restrictions.

4. 4

   Match the part number

   Use the model table below before ordering a camera or bundle.

Best for sharing and awkward angles: FLIR Edge Pro

Edge Pro is our default family pick because you can position the camera separately from the screen and share it between supported platforms. FLIR documents up to 5 m remote operation: Bluetooth establishes the camera's peer-to-peer Wi-Fi network; USB-C is its charging connection. Edge Series datasheet.

Its 160 × 120 native detector and additional 0 to 400°C object range make it our preference over Edge for recurring inspections.

Check Edge Pro at FLIR.

Best direct attachment: FLIR ONE Pro

ONE Pro has three measurement spots and hottest/coldest tracking, and a 15 cm fixed-focus minimum versus 30 cm on Edge models; MSX alignment distance is separate. ONE Pro specifications.

The Android USB-C and iOS USB-C units have different part numbers. FLIR's Pro page labels the iOS USB-C video interface “Micro-USB,” while its specific datasheet says male USB-C. Confirm the ordered part number if descriptions conflict.

Choose the ONE Pro version at FLIR.

Best for simple attached checks: FLIR ONE / Gen 3

ONE is the current name for Gen 3. Its 80 × 60 native detector, −20 to 120°C object range and one centered spot meter suit overview checks when you accept less detail. The adjustable OneFit connector extends up to 4 mm, which helps with cases but does not establish compatibility with every case. ONE datasheet.

Choose Pro for native detail, Edge for wireless positioning.

Choose the ONE / Gen 3 version at FLIR.

Simpler wireless option: FLIR Edge

Choose Edge when wireless placement matters and its 80 × 60 native detector and −20 to 120°C object range suffice. Edge specifications.

Processing specifications conflict: the product page's VividIR row and the older model datasheet (11001-0101) say No; the series PDF says Yes. Confirm that feature with FLIR; our pick rests on native resolution and wireless operation.

Check Edge at FLIR.

Compare the detectors, not the overlay pixels

Sources: current ONE, ONE Pro, Edge and Edge Pro pages. All list 8.7 Hz image frequency. An older Edge model sheet also lists 1 hour 30 minutes in its battery table, conflicting with the current runtime; treat battery figures as manufacturer estimates.

MSX adds visible-camera edges; VividIR combines image frames. Neither turns the listed enhanced output or the attached models' 1440 × 1080 saved-image dimensions into native detector resolution. Those dimensions are separately identified in FLIR's product specifications. Sensitivity describes small thermal differences; the separate accuracy limits below govern temperature readings.

Exact versions and what the kit includes

Use this FLIR part-number table when checking an order:

Wireless Edge is 11001-0101; Edge Pro is 11002-0201. Check regional availability and bundles.

FLIR lists camera, USB-C cable and printed documentation for Edge; attached ONE models add a pouch. Edge's pouch is separate. A phone and wall supply are not listed: budget for those. Box contents.

• Yes: Exact camera name, OS suffix and manufacturer part number agree
• Yes: Current app supports the intended device; Android chipset exclusions checked
• Partly: OneFit helps with cases; confirm actual connector clearance
• No: A charging cable does not convert an Android camera into an iOS camera
• No: A pouch pictured beside Edge does not establish that it is included

Already own a Lightning camera and changed to a USB-C iPhone? FLIR reports some success with Apple's USB-C-to-Lightning adapter but explicitly says that use is not guaranteed or supported. For a new purchase, choose native iOS USB-C or Edge. FLIR adapter caveat.

Winter inspection: target range is not outdoor operating range

The −20°C target range does not mean an attached ONE can operate in freezing air. ONE and ONE Pro list 0 to 35°C operation and 0 to 30°C charging; Edge models list −10 to 50°C operation and 0 to 45°C charging. Attached specifications, Edge specifications. Edge's manual instead limits charging to 0–35°C, or 10–35°C for Korea: follow the supplied regional manual.

The current family reference states ±3°C or ±5% accuracy, applicable 60 seconds after startup, with the camera at 15 to 35°C and the scene at 5 to 120°C. Attached-camera sheets describe the percentage as the difference between ambient and scene temperature. Do not extend those conditions to the entire target range, or assume that operating within the outdoor limit guarantees that accuracy. Family accuracy conditions, ONE Pro accuracy wording.

For insulation investigation, FLIR recommends at least 10°C / 18°F indoors-to-outdoors difference and warns that studs, pipes and columns can resemble defects. Its imaging guidance says to avoid direct sunlight on inspected details. Building examples, imaging guidance.

For a useful record, save the thermal image and visible context, location, time, indoor/outdoor and camera temperatures, weather/sun exposure, distance, emissivity setting and temperature scale. This is our documentation checklist, not a claim that the camera logs all those fields automatically.

Thermal cameras measure surface temperature, and reflective metals complicate readings. FLIR recommends other methods to confirm moisture. ONE manual, moisture guidance. Stay away from live components; leave panel work to a licensed electrician.

How we choose

We compared official specifications, manuals, compatibility/chipset advisories and app requirements. Picks reflect documented fit to the job, without physical testing. Amazon identifiers await owner confirmation. Read How we choose and How we measure.

For choosing across brands and standalone instruments, use our thermal-camera buying guide. For the surrounding investigation, see home energy monitors and clamp meters.

Verdict

Choose Edge Pro for wireless positioning and sharing, ONE Pro for direct attachment and native detail, ONE / Gen 3 for simpler attached checks, and Edge for the simpler wireless detector. Confirm the app, phone, chipset and exact part number before buying: the right connector is only part of compatibility.