Autel
Actual products · maker photographs
Marked measurement category
Not recorded
The record has no confirmed CAT category and voltage pair. A marking in a photograph cannot fill that gap.
The buying trap. Confirm the exact model’s manual before considering it for mains measurements.
This field is not recorded. Check the exact model’s manufacturer documentation.
Autel BT506. Not recorded
We may earn a commission. How we earn.
Standard tester package with the connected clamp cable included.
BT506 with clamp cable
A verified retailer offer is not recorded.
Specifications checked November 5, 2026. Full product details
Autel MaxiBAS BT506 Battery and Electrical System Analysis Tool
A Bluetooth battery and electrical-system tester that clips onto a 6- or 12-volt vehicle battery and reports state of health, state of charge and cranking/charging test results on a paired phone, tablet or Autel MaxiSYS tablet.
Selected package: BT506 with clamp cable.
Model: BT506
These are different products. Check their specifications separately.
Higher-tier Bluetooth tester; Autel lists it separately in the same battery-service line.
Shops wanting the BT508's extra coverage.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Battery types supported | Flooded, AGM, AGM Spiral, EFB and GEL |
|---|---|
| Battery voltage | 6 V and 12 V |
| CCA range | 100 to 2000 A |
| Voltage range | 6 to 36 V |
| Cranking/charging systems | Tests 12- and 24-volt cranking and charging systems |
| Battery rating standards | CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB |
| Connectivity | USB 2.0 Type-C; Bluetooth V3.0 BR/EDR + V4.2 LE dual-mode |
| Input voltage | 5 V DC (working current under 150 mA at 12 V DC) |
| Internal battery | None |
| Cables | Connected cable with clamps included; supports in-vehicle and out-of-vehicle testing |
| Operating temperature | -10 to 50 °C (14 to 122 °F) |
| Storage temperature | -20 to 60 °C (-4 to 140 °F) |
| Dimensions (W x H x D) | 107 x 75 x 26 mm (4.21 x 2.95 x 1.02 in), clamp cable not included |
| Weight | 320 g (0.7 lb) |
| App | Free app for iOS and Android; also runs with the Battery Test application on compatible Autel MaxiSYS tablets |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A 150 W programmable benchtop DC electronic load with 0-120 V and 0-30 A input ratings, CC/CV/CR/CW modes, transient operation to 25 kHz and 16-bit readback resolution.
Check package and model options
A True RMS digital multimeter for field service and electronics work, with a low-impedance mode, VFD-filtered voltage readings, capacitance, frequency and a Type K thermocouple input, rated CAT IV 300 V / CAT III 600 V.
Check package and model options
A 40,000-count True RMS industrial digital multimeter with VFD low-pass filtering, a LoZ ghost-voltage mode, CAT IV-600 V / CAT III-1000 V inputs and Bluetooth streaming to the FLIR METERLiNK app.
Check package and model options
