B&K Precision
1 / 4 · Product viewB&K PrecisionOriginal
Actual products · maker photographs
Marked measurement category
Not recorded
The record has no confirmed CAT category and voltage pair. A marking in a photograph cannot fill that gap.
The buying trap. Confirm the exact model’s manual before considering it for mains measurements.
This field is not recorded. Check the exact model’s manufacturer documentation.
B&K Precision 8600. Not recorded
We may earn a commission. How we earn.
120 V / 30 A / 150 W with USB, RS232 and GPIB interfaces.
8600
A verified retailer offer is not recorded.
Specifications checked November 5, 2026. Full product details
B&K Precision 8600 150 W Programmable DC Electronic Load
A 150 W programmable benchtop DC electronic load with 0-120 V and 0-30 A input ratings, CC/CV/CR/CW modes, transient operation to 25 kHz and 16-bit readback resolution.
Selected package: 8600.
Model: 8600
These are different products. Check their specifications separately.
Same 120 V / 30 A / 150 W ratings with USB and RS232 only, at a lower price.
Bench use without GPIB.
Higher power (250 W to 6000 W), current (up to 720 A) and voltage (500 V) models in the same series.
Higher-power DC source testing.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Input ratings | 0-120 V, 0-30 A, 150 W maximum (single channel) |
|---|---|
| Operating modes | Constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW) |
| Transient mode | Up to 25 kHz; T1/T2 20 µs - 3600 s with 10 µs resolution; adjustable slew rate in CC mode, 0.001-2.5 A/ms (low range) or 0.001-2.5 A/µs (high range) |
| Measurement resolution | 16-bit voltage and current measurement system |
| Readback accuracy | Voltage and current ±(0.05% + 0.05% FS); power ±(1% + 0.1% FS) |
| List mode | Programmable sequence of voltage, current, slew rate and width steps |
| Battery test | Built-in battery test function with voltage level, capacity level and timer stop conditions; battery test software included |
| CR-LED mode | Simulates the loading behavior of typical LEDs |
| Protection | OVP, OCP, OPP, OTP and local/remote reverse voltage (LRV/RRV) protection |
| Remote sensing | Remote voltage sensing compensates for voltage drop in wires |
| Interfaces | USB (USBTMC-compliant) and RS232 standard with SCPI; GPIB standard on the 8600 |
| Power | 110 V/220 V ±10%, 50/60 Hz |
| Dimensions | 8.5 x 3.5 x 15.2 in (218 x 90 x 387 mm) |
| Weight | 9.9 lb (4.5 kg) |
| Safety | EN 61010-1:2001, EU Low Voltage Directive 2006/95/EC |
| Warranty | 3 years |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A Fluke digital multimeter with a built-in 1 kV insulation resistance tester and Fluke Connect wireless sharing, in one handheld tool.
Check package and model options
A kit combining the Fluke 289 true-RMS industrial logging multimeter with the FlukeView Forms software and cable, test leads, alligator clips, thermocouple probe, magnetic hanging kit and soft case, for logging and reporting measurements from a PC.
Check package and model options
A Bluetooth battery and electrical-system tester that clips onto a 6- or 12-volt vehicle battery and reports state of health, state of charge and cranking/charging test results on a paired phone, tablet or Autel MaxiSYS tablet.
Check package and model options
