Fluke
Actual products · maker photographs
Marked measurement category
Not recorded
The record has no confirmed CAT category and voltage pair. A marking in a photograph cannot fill that gap.
The buying trap. Confirm the exact model’s manual before considering it for mains measurements.
This field is not recorded. Check the exact model’s manufacturer documentation.
Fluke FLK-1587-FC. Not recorded
We may earn a commission. How we earn.
The meter itself with remote probe, test leads, alligator clips, K-type thermocouple and soft case.
Fluke 1587 FC Insulation Multimeter
Specifications checked November 5, 2026. Full product details
Fluke 1587 FC Insulation Multimeter (FLK-1587-FC)
A Fluke digital multimeter with a built-in 1 kV insulation resistance tester and Fluke Connect wireless sharing, in one handheld tool.
Selected package: Fluke 1587 FC Insulation Multimeter.
Model: FLK-1587-FC
Adds the i400 AC current clamp for induction tracing and current measurement.
Adds AC current measurement around conductors.
Bundles additional troubleshooting accessories with the 1587 FC.
A complete electrical troubleshooting set.
Bundles the accessories and clamps Fluke pairs for motor and VFD work.
Motor and drive troubleshooting.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Insulation resistance range | 0.01 MΩ to 2 GΩ |
|---|---|
| Insulation test voltages | 50, 100, 250, 500, 1000 V (test voltage accuracy +20%, -0%) |
| Short-circuit test current | 1 mA nominal |
| Live circuit detection | Inhibits an insulation test if terminal voltage is above 30 V |
| Auto-discharge | Under 0.5 s for a 1 μF capacitive load |
| DC voltage accuracy | ±(0.09% + 2), 6 V to 1000 V ranges |
| AC voltage accuracy | ±(1% + 3) from 50 Hz to 60 Hz |
| Current ranges | 60 mA and 400 mA AC (45 Hz to 1 kHz) and DC; overload 600 mA for 2 minutes max |
| Resistance range | 600 Ω to 50 MΩ (overload protection 1000 V rms or dc) |
| Other measurements | Capacitance to 9999 μF, frequency to 99.99 kHz, temperature -40 °C to 537 °C with a K-type thermocouple, diode test, continuity (tone below 25 Ω) |
| VFD low-pass filter | Yes, for variable frequency motor drive measurements |
| Fluke Connect functions | PI/DAR timed ratio tests with TrendIt graphs, memory storage to phone or cloud, temperature compensation, asset trending with Fluke Connect Assets (sold separately) |
| Safety | IEC 61010-1 and IEC 61010-2-033, CAT IV 600 V / CAT III 1000 V, pollution degree 2, IP40 (non-operating) |
| Battery | Four AA (IEC LR6); about 1000 hours of meter use, or at least 1000 one-second insulation tests at 1000 V into 1 MΩ with a 5 s on / 25 s off duty cycle |
| Warranty | Three years |
| Size and weight | 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in); 550 g (1.2 lb) |
| What is included | Remote probe, test leads, alligator clips, K-type thermocouple, soft case, user documentation |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A 150 W programmable benchtop DC electronic load with 0-120 V and 0-30 A input ratings, CC/CV/CR/CW modes, transient operation to 25 kHz and 16-bit readback resolution.
Check package and model options
A compact True-RMS digital multimeter for general electrical and electronic service, with a 6000-count display and manual ranging.
A bundled HVAC troubleshooting kit pairing the Fluke 116 digital multimeter, with temperature and microamp functions for flame-sensor and HVAC work, and the Fluke 323 true-RMS 400 A clamp meter, in a soft carrying case.
Check package and model options
