B&K Precision
1 / 3 · Product viewB&K PrecisionOriginal
Actual products · maker photographs
Marked measurement category
Not recorded
The record has no confirmed CAT category and voltage pair. A marking in a photograph cannot fill that gap.
The buying trap. Confirm the exact model’s manual before considering it for mains measurements.
This field is not recorded. Check the exact model’s manufacturer documentation.
B&K Precision 880. Not recorded
We may earn a commission. How we earn.
100 kHz top frequency, 0.1% basic accuracy, 4-terminal configuration, DCR, auto-detect, full accessory kit.
880
A verified retailer offer is not recorded.
Specifications checked November 5, 2026. Full product details
B&K Precision 880 Dual Display Handheld 100 kHz LCR Meter with ESR
A 40,000-count handheld LCR meter that measures L, C, R, Z and DCR with 0.1% basic accuracy, test frequencies to 100 kHz, ESR measurement, and a 4-terminal Kelvin test lead set included.
Selected package: 880.
100 kHz top frequency, 0.1% basic accuracy, 4-terminal configuration, DCR, auto-detect, full accessory kit.
The complete handheld kit for serious component work.
These are different products. Check their specifications separately.
Same meter with a 230 V AC adapter instead of the 120 V one.
Buyers in 230 V regions.
0.5% basic accuracy, 10 kHz top frequency, ESR and Theta but no DCR, 0.6 Vrms fixed test level.
Leaded-component checks at a lower price point.
L/C/R/D/Q only, 120 Hz and 1 kHz, no backlight, AC adapter optional.
Basic L, C and R measurement.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Measurements | Primary: L, C, R, Z, DCR; automatic secondary: D, Q, Theta, ESR |
|---|---|
| Display | Dual display, 40,000 counts primary and 10,000 counts secondary, backlit |
| Basic accuracy | 0.1% |
| Test frequencies | 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz (actual frequency ±0.02%) |
| Test signal levels | 0.3 Vrms, 0.6 Vrms, 1 Vrms; DCR signal 1 Vdc |
| Measuring circuit | Series or parallel mode; 3-terminal and 5-terminal with sockets (4-terminal configuration) |
| Measurement rate | LCRZ 4 readings/s (fast) or 1.5 readings/s (slow); DCR 3 readings/s (fast) or 2.5 readings/s (slow) |
| Auto detect mode | Automatic component type identification and measurement type selection |
| Tolerance sorting | Visible and audible tolerance mode, 1%, 5%, 10%, 20% bins |
| Other functions | Data hold, Min/Max/Average recording, relative mode, configurable power-up states, auto power-off (5/15/30/60 min or none) |
| Interface | Mini USB (virtual COM) with SCPI-compliant commands |
| Power | 9 V battery (16 h alkaline, 6 h Ni-MH) or included 120 V AC adapter (DC 12-15 V) |
| Dimensions | 7.5 x 3.5 x 1.6 in (190 x 90 x 41 mm) |
| Weight | 0.767 lb (348 g) without battery |
| Safety | EN 61010-1:2001, EU Low Voltage Directive 2006/95/EC |
| Warranty | 3 years |
| Included accessories | Banana-to-alligator test leads, Ni-MH 9 V battery, mini USB cable, Quick Start insert, AC adapter, shorting plate, four-terminal shielded Kelvin clip test leads (TL8KC1), SMD tweezer (TL8SM) |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A 5 1/2-digit true-RMS bench multimeter with 12 measurement functions, a 4.3-inch color display, and standard LAN, USB and RS232 interfaces for the lab bench or rack.
Check package and model options
A 150 W programmable benchtop DC electronic load with 0-120 V and 0-30 A input ratings, CC/CV/CR/CW modes, transient operation to 25 kHz and 16-bit readback resolution.
Check package and model options
A 6000-count autoranging True RMS digital multimeter with a dual-display, low-pass VFD filter, low-impedance AutoV LoZ mode and input-alert beeping, aimed at electronics and component work.
Check package and model options
