Fluke
Fluke 2052 Advanced Wire Tracer Kit (FLUKE-2052, part 5353853)
We may earn a commission. How we earn.
Check price on AmazonModel: FLUKE-2052
Receiver, transmitter, i400 clamp, test lead accessory kit and hard case.
Important limit: A kit with receiver, transmitter, clamp and case is heavier and pricier than a plug-in breaker finder made for one job
Confirm condition, quantity and included accessories on the retailer’s listing.
Compare versions and packagesSpecifications checked November 5, 2026. Full product details
Fluke 2052 Advanced Wire Tracer Kit
A Fluke wire tracer kit for locating energized and de-energized wires, breaks, shorts, breakers and fuses up to CAT IV 600 V, with a receiver, transmitter and i400 current clamp.
Selected package: Fluke 2052 Advanced Wire Tracer Kit (FLUKE-2052, part 5353853).
Receiver, transmitter, i400 clamp, test lead accessory kit and hard case.
Professional wire tracing and breaker finding up to CAT IV 600 V.
The higher-tier kit with more modes and accessories; Fluke lists it as a related product at a higher price.
When you need the top tracing model.
Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.
| Kit contents | Fluke 2052R Advanced Wire Tracer Receiver, Fluke 2000T Advanced Wire Tracer Transmitter, i400 AC Current Clamp, Fluke 2000ACC Test Lead Accessory Kit, premium hard carrying case, batteries, quick reference guide |
|---|---|
| Receiver tracing modes | Quick Scan (energized wire detection on the color LCD), Precision, Breaker (identifies breakers and fuses by the highest recorded transmitter signal), and Non-Contact Voltage detection without the transmitter |
| Transmitter power modes | High for normal circuits, Low for precision tracing with reduced coupling, and Loop for closed-loop de-energized circuits |
| Transmitter frequencies | 6.25 kHz energized / 32.768 kHz de-energized, selected automatically |
| Receiver sensitivity levels | Eight |
| Signal current output (typical) | Energized: 60 mA rms high / 30 mA rms low; de-energized: 110 mA rms high / 40 mA rms low; loop with leads: 160 mA rms; loop with the i400 clamp: 385 mA rms |
| Detection range (open air) | Tip sensor, energized: up to 6.1 m (20 ft); de-energized: up to 4.5 m (14.7 ft); pinpointing within about 5 cm (1.97 in) |
| Non-contact voltage detection | 40 Hz to 400 Hz; maximum sensitivity 90 V up to 2 m, minimum sensitivity 600 V up to 1 cm |
| i400 AC Current Clamp | 400 A range, 2% + 0.06 A basic accuracy from 45 Hz to 400 Hz, CAT IV 600 V / CAT III 1000 V, 32 mm (1.26 in) maximum conductor size |
| Receiver display | 63 mm (2.5 in) TFT LCD, 240 x 320 px, 16-bit color, with backlight, numeric, bar graph and audible indications |
| Safety | CAT IV 600 V measurement category on receiver, transmitter and clamp; pollution degree 2; IP40; 1 m drop test |
| Batteries | Receiver: 4 x AA alkaline, about 16 h. Transmitter: 8 x AA alkaline, about 25 h in high/low mode, 18 h in loop mode |
| Dimensions | Receiver about 183 x 75 x 43 mm (7.2 x 2.95 x 1.69 in), 0.27 kg (0.6 lb); transmitter about 183 x 93 x 50 mm (7.2 x 3.66 x 1.97 in), 0.57 kg (1.25 lb) |
| Operating temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.
A pen-style non-contact AC voltage detector that senses 90 to 1000 V AC, glows red and beeps near live conductors, runs a continuous self-test and is rated CAT IV 1000V.
Check package and model options
An Advanced Pro wire tracer kit for locating energized and de-energized wires, identifying breakers and tracing conductors through walls and conduit.
An open-fork electrical tester that measures ac voltage up to 1000 V and current up to 200 A through the fork without contacting live voltage, showing both on one screen.
Check package and model options
