Skip to content
Menu

Fluke

Fluke i1010

Fluke i1010 AC/DC Current Clamp, front view of the whole clamp on a white background

1 / 1 · Product viewFlukeOriginal

Check your model and package

Fluke i1010 AC/DC Current Clamp (part 617735)

Measurement type:
Hall sensor; measures both AC and DC current
Nominal current range:
600 A AC / 1000 A DC
Continuous current range:
1 A to 600 A AC; 1 A to 1000 A DC

We may earn a commission. How we earn.

Check price on Amazon
Compare
Package details

Model: Fluke i1010

The clamp probe with 1.6 m cable and shrouded banana plugs.

Condition:
Confirm new or reconditioned on the listing
Quantity:
Confirm package quantity on the listing

Important limit: It is a probe, not a standalone meter: you need a compatible multimeter to read it

Confirm condition, quantity and included accessories on the retailer’s listing.

Compare versions and packages

Specifications checked November 5, 2026. Full product details

Fluke i1010 AC/DC Current Clamp

A battery-powered Hall-effect clamp probe that adds 600 A AC and 1000 A DC current measurement to Fluke multimeters, with a 1 mV/A output for their voltage input.

Which version should you buy?

Selected package: Fluke i1010 AC/DC Current Clamp (part 617735).

Selected package

  • Fluke i1010 AC/DC Current Clamp

    This page

    Model: Fluke i1010

    What differs
    The clamp probe with 1.6 m cable and shrouded banana plugs.
    Best for
    600 A AC / 1000 A DC measurement with a Fluke multimeter.
    Check price on Amazon

Related models and generations

These are different products. Check their specifications separately.

  • Fluke i410 AC/DC Current Clamp Model: Fluke i410

    The lower-range sibling: 400 A AC / 600 A DC with the same Hall-effect design.

    Lower-current AC/DC work.

Purchase links appear where the exact offer is verified. Confirm the named model, quantity and accessories before ordering.

Watch out

  • i1010 vs i410: the i1010 reaches 600 A AC / 1000 A DC; the i410 tops out at 400 A AC / 600 A DC.
  • The older 80i-1010 is the predecessor clamp; the i1010 replaced it.
  • This is an accessory probe, not a display meter; readings appear on your multimeter.

Why people pick it

  • Measures both AC and DC up to 1000 A without breaking the circuit, using a large Hall-effect jaw
  • Compatible with most Fluke multimeters via a 1 mV/A output and shrouded banana plugs
  • Useable from DC to 10 kHz, which covers VFD and general electrical work
  • Zero error adjustment keeps DC readings accurate after drift

Know before you buy

  • It is a probe, not a standalone meter: you need a compatible multimeter to read it
  • Basic accuracy is 2% + 0.5 A, and it cannot resolve below 0.5 A, so small currents are out of reach
  • CAT III 600 V only, lower than the CAT IV ratings on some Fluke clamp meters
  • Needs a 9 V battery; a dead battery stops all measurements

Full specifications

Measurement typeHall sensor; measures both AC and DC current
Nominal current range600 A AC / 1000 A DC
Continuous current range1 A to 600 A AC; 1 A to 1000 A DC
Lowest measurable current0.5 A
Maximum non-destructive current1000 A
Basic accuracy2% + 0.5 A (useable frequency DC to 10 kHz)
Output level1 mV/A to the meter's mV input, with zero error adjustment
Jaw opening30 mm, or 2 x 25 mm bus bars
Output cable1.6 m with shrouded banana plugs
SafetyCAT III, 600 V, maximum voltage 600 V
Battery9 V, about 60 hours
WarrantyOne year

From manufacturer documentation, checked November 5, 2026. Spotted an error? Tell us.

Alternatives to consider

Hioki CM4373-50 AC/DC Clamp Meter (2000 A)

Hioki CM4373-50

Max voltage
1,000 V
Display counts
6,000 counts
Specifications & conditions
Safety rating
CAT IV 600 V, CAT III 1000 V
Max current
2,000 A

A True RMS 2000 A AC/DC clamp meter with IP54 storage protection and a wide range of DMM functions, aimed at EV, solar and heavy-equipment maintenance work.

Check package and model options

  • Pros
  • Automotive
  • Solar & batteries
Find on AmazonDetailsCompare
Klein Tools CL390 400A AC/DC Auto-Ranging True RMS Clamp Meter

Klein Tools CL390

Max voltage
600 V
Display counts
4,000 counts
Specifications & conditions
Safety rating
CAT III 600V
Max current
400 A

A 4,000-count True RMS clamp meter that measures AC and DC current to 400 A, voltage to 600 V and DC microamps, with non-contact voltage detection in the jaw and a thermocouple for temperature.

Check package and model options

  • Pros
  • Automotive
  • Solar & batteries
Check price on AmazonDetailsCompare