| Cable types | Data (RJ45, shielded or unshielded, Cat 6), voice (RJ11/RJ12) and coax (F connector) |
|---|
| Wiremap results | Opens, shorts, miswires and crossovers on shielded or unshielded cable |
|---|
| Length (TDR) | Coax 0 to 2,000 ft (610 m), data 0 to 3,000 ft (914 m), electrical 0 to 1,000 ft (305 m), per the manual |
|---|
| Length accuracy | ±(2% + 3 ft or 1 m) with a known velocity of propagation and consistent cable |
|---|
| PoE | Tests IEEE 802.3af, 802.3at and 802.3bt (Types 1 to 4) and passive PoE up to 60 V; identifies Mode A, B and 4-pair |
|---|
| Active network | Shows advertised speeds of 10/100/1G/10GBASE-T, half or full duplex; hub blink |
|---|
| Location ID | Up to 20 locations with the included remotes (20 RJ45 LanMap and 20 coax CoaxMap remotes) |
|---|
| Tone | Analog tones at 800 to 1500 Hz; digital tone needs the VDV500-223 probe (sold separately) |
|---|
| Telephone | POTS tip and ring voltage test |
|---|
| Results | Stores up to 200 tests; exports a CSV file over USB-C (shows up as a folder on a computer) |
|---|
| Display | Full-color backlit screen |
|---|
| Input protection | 60 V peak 50/60 Hz AC or DC; only the RJ45 port is meant for PoE-powered cables |
|---|
| Power | 3 × AA; about 15 hours active, 1 year standby |
|---|
| Drop protection | 2 m (6.6 ft) |
|---|
| Size | 4 × 7.2 × 1.6 in (10.16 × 18.29 × 4.06 cm) |
|---|
| Weight | 15.8 oz (448 g) with batteries |
|---|
| In the box | Tester, USB-C to USB-A cable, coax F to bed-of-nails cable, two each of RJ11, RJ12 and RJ45 Cat 6 patch cables, 20 RJ45 and 20 coax ID remotes, F barrel, 3 × AA batteries and a CR2032 battery |
|---|