Thermal Camera Macro Lenses

Buy a thermal camera macro lens only when the maker confirms it for your exact camera and housing revision. Thermal Master's P2 Pro Android package is the documented camera-plus-magnetic-lens option here, but a Canada-only label and conflicting stock messages prevent an order-ready US recommendation. For an already-owned camera, use the compatibility results below: confirm a matching replacement, or stop with no confirmed compatible accessory.

Quick picks: start with the camera you already own

Sources: Thermal Master's P2 Pro package and comparison, P2 comparison, and P3 description in its FAQ. “Not confirmed” describes the limits of this check, not proof that an accessory cannot exist.

Conditional complete package: Thermal Master P2 Pro Android

Choose this as a complete camera package only after supply is confirmed, if you cannot obtain a supported replacement for your existing camera. The maker's specification lists P2 Pro Android | P2 Pro IOS, Magnetic Macro Lens under accessories, and 256 × 192 infrared resolution. Its general FAQ also says the P2 Pro includes a magnetic macro lens.

The Android package's maker SKU is 1A01200023 in the page's variant data. Use that identity when confirming the order. It identifies the whole Android camera package, not a lens-only replacement part. Ask the maker to confirm that the supplied lens matches the supplied camera and that the package can ship to your location.

Availability is unresolved. The retrieved page title says Canada Only, and its visible purchase area says Out of Stock. The embedded variant data simultaneously marks Android available. Those conflicting messages do not establish a current US purchase route; a general worldwide-shipping paragraph does not resolve the product-specific restriction. Reconfirm eligibility and availability before paying.

The page also calls the macro lens “built-in” in its FAQ while its specification calls it a magnetic accessory. We rely on the explicit accessory description for identifying the package, but recommend obtaining a contents photo and replacement-part confirmation rather than assuming a particular housing construction.

Confirm the complete package and regional supply with Thermal Master.

Lens-to-camera compatibility: what the documentation establishes

The P2 Pro specification and embedded variant data, original P2 comparison, and P3 FAQ support the documented rows. Missing dimensions and compatibility remain missing; visual similarity is not our basis for a fit recommendation.

Xinfrared P2pro: a lead that still needs verification

The Android accessory URL and iOS accessory URL could not be retrieved during this source check. We therefore cannot verify their current specifications, housing-revision coverage or US availability, and do not present either as an order-ready pick. No numerical lens claims from those inaccessible pages are used here.

If you already own an Xinfrared/InfiRay P2pro, send the maker your camera label, original order identity and clear photos of its front and connector. Request the exact replacement accessory identity, confirmation for that housing revision, and a current purchase route for your region. If the maker cannot provide that match, the result is no confirmed compatible accessory. Do not substitute Thermal Master's package lens on the strength of a similar P2 Pro name.

Resolve Android, iOS and package variants before ordering

Thermal Master's comparison explicitly calls P2 Pro iOS and Android separate products. Its variant data identifies Android as 1A01200023 and iOS Lightning Port(including USB-c adapter) as 1A01200024. The iOS variant is marked unavailable in that data. These are camera-package identifiers, not evidence of replacement-lens interchange.

Keep the camera-to-phone connection and lens-to-camera fit as separate checks. First confirm your phone's operating system, port and the maker's supported camera package. Then confirm the attachment against the camera housing. An adapter included in one package is not permission to mix another package's camera, app or lens.

• Yes: Confirmed package: Thermal Master lists a magnetic macro lens with P2 Pro.
• Partly: Separate replacement: obtain its exact part identity and camera-revision match.
• No: Unlisted host: the checked P2 Pro documents do not establish cross-brand compatibility.

Working distance, field of view and mounting clearance

Ask for specifications with the macro lens installed. Thermal Master's P2 Pro table gives a 56.0° horizontal × 42.2° vertical field of view and an athermalized prime lens focusing mode. It does not label those angles as the macro accessory's field of view or give a macro working distance. We would not size a board holder from those angles.

Before committing to a fixed mount, ask the maker for the usable distance from the front of the attached lens to the component, the board area visible at that distance, and any stated focus tolerance. Confirm where the distance is measured from. Also request the accessory's outer dimensions and how far it projects beyond the camera body.

For clearance, sketch your actual setup: phone and case, camera connector, fitted accessory, support arm, board holder and tallest nearby component. Check whether you can reach the area you want to inspect without touching the board or blocking the lens. Request a mounting photo if the dimensional drawing is incomplete. These are purchase checks, not claimed dimensions of an unverified accessory.

Do not buy by digital zoom. The same P2 Pro page separately advertises 15× pinch-to-zoom and lists the magnetic macro accessory. The zoom figure supplies no replacement part number, mounting dimensions or macro focus distance. Likewise, its headline's 512 × 284 enhanced-resolution claim conflicts with 512 × 384 in its comparison; use the clearly labeled 256 × 192 infrared specification when identifying this camera, and resolve optical fit separately.

Magnetic, clipped and integrated arrangements

For a magnetic attachment, obtain a match to the camera revision, not just a promise that it attaches. The P2 Pro documentation establishes a magnetic accessory in that package; it provides no general magnetic-mount standard for other hosts. Ask for the attachment orientation and any required app or measurement settings.

For a clipped accessory, require a maker-documented camera match and a drawing showing the clamp's fit and optical alignment. We have no verified clipped-lens pick from this check. Do not treat “universal” wording as a substitute for a supported host list.

For an integrated focusing arrangement, identify what your camera already has. Thermal Master's FAQ describes P3 as having a built-in manual-focus macro lens. That description does not turn the P3's optics into an add-on for your existing P2, TOPDON or FLIR camera. Keep complete-system choices in our thermal cameras for electronics guide.

1. 1

   Identify the camera

   Record brand, full model, housing revision, phone system and connector; photograph the label and front.

2. 2

   Confirm the accessory

   Obtain the exact replacement part, host match, installed focus distance, coverage and mounting clearance.

3. 3

   Confirm the package

   Distinguish lens only from camera plus lens; resolve regional restrictions, contents and stock with the maker.

4. 4

   Stop if fit stays unknown

   Keep the result as no confirmed compatible accessory, or compare complete supported macro systems.

How we choose

Recommendations use official manufacturer pages retrieved for this guide, checked November 2, 2026. We compared model identities, package contents, variant data and compatibility statements. We publish no measurements of our own here. An inaccessible listing stays unverified; contradictory availability, construction and resolution claims remain identified instead of being silently reconciled. Our selection method explains the wider process.

For temperature interpretation, Thermal Master's FAQ advises matching emissivity to the surface and avoiding highly reflective surfaces when accuracy matters. A close image alone should not be your purchase criterion for a temperature-measurement task; request the maker's measurement conditions for the fitted accessory.

Verdict

For an existing camera, buy only its confirmed matching replacement. Thermal Master documents a P2 Pro camera-plus-magnetic-lens package, but a separate replacement part and an order-ready US route remain unconfirmed here. Xinfrared's accessory leads also need fresh verification; for unlisted TOPDON, FLIR and other hosts, the result is no confirmed compatible accessory from the checked sources.

If your maker cannot supply that match, use our PCB camera guide to choose a complete supported macro system. For broader inspection-camera choices, return to best thermal cameras.